Pages

Tuesday, April 7, 2015

Creating an Interior Wood Patterned Wall

Gene and I are still working on our stone cottage...well, mostly Gene. But I did take off a week to work on the living room fireplace wall with him. Here are some pictures of the left side of the wall.

Facci-Designed, Gene-Built wood wall.
I took a picture of the wall and I mocked up 11 different designs. See 4 of them below.

4 of the 11 designs I came up with.
We decided to go with 10ft pine boards in 2 in, 4 in and 6 inch widths. We tried out a few stains and settled on Dark Walnut, Early American and Ebony, with some mixing of each on some of the boards. I sanded and stained about 100 boards for this project. What a way to spend a vacation...

I also distressed 2 larger pieces of wood by torching, hammering, chiseling and poking it with a screwdriver to create an aged look.
Prepping for the pine boards
Gene prepped the stone wall by installing plywood and then black paper on top of that (just in case the seams weren't that tight or the wood shifts a bit.) Once the boards were dry, we started our pattern.  I chose the colors and lengths and Gene measured, cut and installed. For the boards that butt up to the fireplace, Gene painstakingly cut each one to fit tightly in around the stone.

Before and after of our wood wall project
Now onto the right side of the wall...where there's a door that leads to the bedroom...what will we do...stay tuned!

1 comment:

  1. It's very nice Interior Wood Patterned Wall.Its is awesome design of the wall interior designs.
    commercial interior designers

    ReplyDelete